VAYA HAUTECASE is a double-walled, vacuum-insulated serving vessel that keeps food of your choice warm or cold for 4 to 5 hours*.

* The performance is tested under standard laboratory conditions

HAUTECASE Comes in two different volumes – 1.1 litre capacity and 1.5 litre Capacity.

HAUTECASE is made of insulated metal body that comes along with a Plastic Lid (Stack Lid) with stainless steel bottom. The user has the freedom to choose between Stack lid or Glass lid or both.

HAUTECASE is made of the best-in-class materials for consumer food ware. The metal body uses food grade stainless steel 304, which has high corrosion resistance to usage with standard food product. The antiskid bottom of the casserole is made of high impact resistant co-polyester with elastomer.

The lids are available in two options:

One made with Tritan (Stack Lid), which is a BPA free plastic. Tritan is impact-resistant — products can be used without fear of shattering and bottom food contact surface with stainless steel 304 Second one is a glass lid which is a 4mm thick tempered glass with food grade silicone lining and a knob.

A. Hautecase Metal Body - Not recommended for Dishwasher

B. Hautecase Lids (Stack & Glass) – Dishwasher Top rack Safe.

Metal Body: Always rinse the metal body after use in warm water. Any mild dishwashing liquid can be used to clean the product. The external surface of the metal body must be cleaned only with a soft sponge, since usage of abrasive cleaning pads/ scrubbers / steel scrubbers can cause damage to the exterior paint finish.

The inner surface of the metal body can be cleaned with a scrubber. Do not use steel scrubbers as they can leave small steel pieces and scratches on the inner stainless-steel surface.

Stack & Glass Lid: Hand wash the lids in warm water (<60⁰C) with mild detergent.

HAUTECASE is designed to withstand bumps and nicks of everyday usage. Any drop from greater heights (beyond 1 Meter) will impact the structural integrity of the product.

For a safe and leak-proof experience, always fill HAUTECASE to the fill line marking engraved on the metal body as shown below.

Yes, the Lids (Stack & Glass) materials used in HAUTECASE are BPA-free and food safe.

No. Storing any vacuum-insulated product in the refrigerator might damage the vacuum seal.

No, it is not microwaveable.

There is a getter material placed between the shells in the vacuum region for enhanced thermal performance. This might give a mild rattling noise in the metal body.

When using HAUTECASE, do not hold it by its lids (Both types); always hold it by the body.

No, when you first receive the product, wash the components thoroughly with warm water and mild dishwashing liquid before usage.

The thermal performance* of vacuum insulated HAUTECASE with a capacity of 1.1 litre & 1.5 litre is given below in the form of graphs. The graphs show the heat retention performance (6 hrs.) for your reference.

* The performance is tested under standard laboratory conditions with Stack lids.

HAUTECASE can be handled by kids under the supervision of adults. Since the content is hot and the weight of the product with food contents are generally heavy, it is better adults handle it rather kids. Dropping the product may cause injury for kids.

Unlike other product these lids don’t require any level of pressing. For Stack Lid, gently place it on the top of the metal body, which seals the inside content because of the ring provided on the bottom of the lid. For Glass Lid, the silicone by itself act as a sealant when placed on the top.

The HAUTECASE is not designed to be heated. Doing so will cause permanent damage to the product. Do not heat it on a stove or in a wok or cooking vessel.

After cleaning the HAUTECASE, store it in the open in a cool and dry place to prevent formation of bacteria, mold and other unpleasant odors.

Yes, they can be stacked one on another when used with the Stack Lids and in case of glass lids they do not have the flexibility of stacking.

Generally, SS304 doesn’t stick to magnets. But during the processing of the metal and due to some changes in the microstructure, the steel body might have developed some magnetic property which may have very less force of attraction on magnets.

Glass lids give the user to see through the food inside the casserole, though there will be some thermal performance lost due to the property of the material. Also, these lids are made tempered glass and shatter proof, which will not get shattered like glass when subjected to multiple drops (Tested in lab). But user need to have the feel that it is glass.

The Glass lids are made of Borosilicate Material, having very low coefficient of thermal expansion, more resistant to thermal shock and tempered (hard to break). It is exceptionally durable and is perfectly safe to use in kitchen applications.

While Borosilicate is far more durable and resistant to thermal shock than other types of glass, it is glass, so breakage is still a possibility. Borosilicate glass is hypoallergenic, lead-free and unlike a plastic straw, it is BPA-free.

No, not all glass is food safe. The two most common types of glass used in consumer kitchenware are soda-lime silicate glass and Borosilicate glass. 

Just like regular glass, Borosilicate glass is completely non-toxic.

POPCUP is a double-walled, vacuum-insulated cup that keeps beverages of your choice hot or cold for 5 hours.

POPCUP’s capacity is 250 ml

POPCUP is made of an insulated metal body that comes along with a plastic lid and an O-ring.

POPCUP is made of the best-in-class materials for consumer food ware. The Lid is made with BPA-free Tritan plastic which is also impact-resistant - The product can be used without fear of shattering! The metal body is made of food-grade stainless steel 304 which has high corrosion resistance to standard food product usage conditions.

a. Metal Body and Plastic Lid - Dishwasher top-rack safe.

b. O-Ring - Not recommended for Dishwasher

Plastic Lid : Hand wash the lid in warm water ( <60⁰C) with mild detergent.

Metal Body : Always rinse the metal body after use in warm water. Any mild dishwashing liquid can be used to clean the product. The external surface of the metal body must be cleaned only with a soft sponge, since usage of abrasive cleaning pads/ scrubbers / steel scrubbers can cause damage to the exterior paint finish.

The inner surface of the metal body can be cleaned with a scrubber. Do not use steel scrubbers as they can leave small steel pieces and scratches on the inner stainless steel surface.

POPCUP is designed to withstand bumps and nicks of everyday usage. Any drop from greater heights will impact the structural integrity of the product.

For a safe and leak-proof experience, always fill POPCUP only up to the fill line.

POPCUP is recommended for usage of beverages within the user's comfortable drinking range.

Caution: Care should be taken while filling and drinking too hot or too cold beverages

Yes. POPCUP’s lid is made of materials that are BPA-free and food safe.

No. Putting any vacuum-insulated product in the refrigerator might damage the vacuum seal.

No. POPCUP is not microwaveable.

The material placed in the vacuum region for enhanced thermal performance might produce a rattling noise when you shake your POPCUP.

Unlock the plastic lid from the metal body and fill with the beverage of your choice. Fill only up to the fill line and close with the plastic lid.

The thermal performance of vacuum-insulated POPCUP with a capacity of 250 ml is given below in the form of graphs. The graphs show the heat (5 hrs) and cold (5 hrs) retention performance for your reference.

Note:Do not use pop cup with or without straw for Sipping hot fluids directly from the lid.

When using POPCUP, do not hold it by its lid, always hold it by its body.

When you first receive the product, wash the components thoroughly with warm water and mild dishwashing liquid before usage.

POPCUP can be used by kids of all ages but care has to be taken regarding the temperature of the beverage. Since the contents of the POPCUP ( metal ) can be hot, they should be handled by kids under the supervision of adults. Ensure that the product is kept out of the reach of toddlers and infants.

A moderate level of pressing such that the O-ring is firmly seated on the lid and the metal and lid are in contact is required. Make sure that your POPCUP is always used with the circular seal secured on the lid. .

No. There will be a leak from the lid as it has a sipper hole to drink from the side. Always place the POPCUP standing upright.

Yes, you can take your POPCUP on an airplane, but security may inspect its contents. Restrictions on the type and volume of the contents may also apply.

POPCUP is not designed to be heated. Doing so will cause permanent damage to the product. Do not heat it on a stove or in a wok or cooking vessel.

After cleaning your POPCUP, store it in the open on a cool and dry place to prevent formation of bacteria, mould and other unpleasant odours.

Drynk is a drink-ware that lets you enjoy beverages of all kinds. It comes with a sipper lid, a gulper lid and two cups for sharing.

The Sipper lid is designed for you to sip hot beverages of your choice. It comes with a magnetic latch that keeps the cap open and prevents it from falling on your nose.

The Gulper lid with its wide mouth is designed for you to guzzle down cold water, juices and your favourite beverages. It comes with two cups for sharing!

Drynk is made of best-in-class materials for consumer food-ware. The plastic components are made with eco-friendly Bio-Copolyester that is known to have high chemical and stain resistance. It is also BPA free and FDA certified. The metallic component is made of food-grade stainless steel 304, which has corrosion resistance across standard food product usage conditions.

Drynk comes in two sizes – 600ml and 350ml.

Drynk is a one-of-its-kind tumbler that can be customised with multiple lids according to the user’s preferences.  Because of the wide mouth and gradually tapering design of Drynk, you can even carry items like payasam, sambar, smoothies, protein shakes and have an amazing drinking and a hassle-free cleaning experience.

You can enjoy your beverages for up to 12 hours in case of hot beverages and up to 18 hours in case of cold beverages*. The performance of Drynk significantly depends on the temperature of the beverage when first poured into it. The below graphs show the performance of Drynk over a 12-hour period.

*Tested under laboratory conditions.

Drynk-Cold Rentention Performance

Drynk-Heat Rentention Performance

No. Drynk is not dishwasher safe.

Drynk has been engineered to give best drinking experiences over common beverage consumption temperatures. Hence you can enjoy your hot beverages like coffee, tea etc. or cold beverages such as smoothies, cold coffee with equal comfort.
Important Note:
Care should be taken when using Drynk to carry boiling hot water. After filling the water up to the fill line, let the water cool a bit to let off the vapour and then put on the lid. Do not close Drynk immediately after filling.

Unlock the lid from the metal body and fill the metal body with the beverage of your choice. Make sure to fill only up to the fill line. Keep the caps of the sipper or gulper lid open and lock the lid on the metal body. Close the cap after the lid has been properly locked onto the metal body. Do not lock the lid with caps closed.

When using the gulper lid, do not hold Drynk by the cups; Always hold Drynk by the metal body.

The heat retention performance of Drynk during usage can be optimized by priming the product before use.

Priming instructions are as follows:

1. Fill the Drynk metal body with hot water.

2. Let it sit for a few minutes

3. Empty the metal body and fill it with the hot beverage you wish to carry.

For cold beverages follow the above instructions with cold water instead of hot water.

Any mild dishwashing liquid can be used to clean all parts of the Drynk. The inner surface of the Drynk metal body can be cleaned with a scrubber, however the outer surface must be washed only with a soft sponge since usage of abrasive scrubbers can damage the exterior paint finish. We recommend using Vaya Bottle Bright -natural cleaning tablets for the most effective cleaning of the Drynk.

Drynk is designed to withstand bumps and nicks that occur due to everyday usage. Any drops from greater heights will impact the structural integrity of the product.

For a leak-resistance and safe experience, always fill Drynk only up to the fill line.

Yes. The materials used in Drynk are BPA free and food safe.

No. Storing Drynk in the refrigerator might damage the vacuum seal.

No. Drynk is not microwaveable.

There is a layer of insulating foil in the vacuumed region for enhanced thermal performance. This might give a mild rattling noise in the metal body. This is not indicative of any fault with the unit and is normal.

No. When you first receive the product, wash the components thoroughly with warm water and mild dishwashing liquid, before usage.

Since the contents of Drynk will be hot, they can be handled by pre-teens and adolescents provided they are careful.
Drynk is not intended for use by toddlers and infants. Ensure that the product is kept out of the reach of toddlers and infants.

A moderate level of tightening such that the seal is firmly held between the metal body and lid is adequate. Do not over tighten the lids. Make sure that Drynk is always used with the circular seals secured on the lids.

No. For optimal leak resistance, always place Drynk standing upright.

You can take your Drynk on an airplane, but security may ask you to inspect its contents before boarding. Restrictions to the type and volume of the contents may also apply.

Drynk is not designed to be heated. Doing so will cause permanent damage to the product. Do not heat Drynk on the stove or in a wok, cooking vessel etc.

After cleaning Drynk(please refer earlier FAQ), store it open in a dry, cool place; to prevent unpleasant odors or the formation of bacteria and mold.

Preserve is a vacuum insulated food storage/carrying container that can be used independently or in stackable groups.

Preserve is made of best-in-class materials for consumer food ware. The plastic components are made with Eco friendly Bio-Polyester, which has high chemical and stain resistance. It is also a BPA free and FDA certified material. The metallic components use food grade Stainless Steel 304 which has high corrosion resistance to standard food product usage conditions.

The Preserve comes in three sizes- 300ml, 500ml and 700ml.

The main parts that you will handle in the Preserve are the insulated lid and insulated metal body.

The preserve metal body is dishwasher safe. The lids are not.

The heat retention performance of the Preserve during usage can be optimized by priming the product before use.

Priming instructions are as follows:

a. Fill the Preserve metal body with hot water.

b. Let it sit for a few minutes.

c. Empty the metal body and fill it with the hot food item you wish to store/carry.

For cold food items repeat the above instructions with cold water instead of hot water.

Always rinse the metal body after use and rinse the lid under running water. Any mild dishwashing liquid can be used to clean the product. The external surface of the metal body must be washed only with a soft sponge, since usage of abrasive cleaning pads/scrubbers or steel scrubs can damage the exterior paint finish.

The inner surface on the metal body can be cleaned with a scrubber. Do not use steel scrubs as it can leave small steel pieces and contaminate the Preserve’s Stainless-Steel surface.

Ensure that the Preserve unit is completely dried after washing.

The Preserve is designed to withstand bumps and nicks of everyday usage. Any drops from greater heights will impact the structural integrity of the product.

For a leak-proof and safe experience, always fill the Preserve only up to the fill line.

Yes. The materials used in the Preserve are BPA free and food safe.

No. Storing any vacuum insulated product in the refrigerator might damage the vacuum seal.

No. The Preserve is not microwaveable.

There is a layer of insulating foil in the vacuumed region for enhanced thermal performance. This might give a mild rattling noise in the metal body.

Whenever there is a drop in pressure in the container during usage, the relief valve opens allowing some air from the environment to enter the container through the top plug. This equalises the pressure and prevents the preserve from locking up.

The entire process is automatic. You can just open the preserve and enjoy your packed meal.

Without the top plug and relief valve, the contents of the preserve will leak. The thermal performance will also be significantly affected. Always use the preserve with all the given gaskets, top plug, and relief valve for betterment of the content inside.

During such cases it is advised to remove the plug along with the relief valve from the lid, separate the parts each other, clean it completely and then refix the same in its respective positions. The reason being that keeping unnoticed after spillage, may leads to settlement of content inside, later erupt foul smell thereafter.

It could be more severe when using sensitive foods like dairy & poultry products.

The thermal performance of 300ml, 500ml and 700ml preserve is given below in the form of graphs.

The graphs show the heat and cold retention performance over a period of 0-6hrs.

Vaya Pedia safe lid is a part of drinking cup designed to prevents or reduces fluids spills. It can be used by both Kids & Adults starting from the age limit of 2+ Yrs.

Vaya Drynk comes in two sizes – Vaya Drynk Plastic 280ml & Vaya Drynk Metal 350ml.

Body is made of plastic along with the lid.

Body is made of metal and is Vacuum Insulated while the Lid is made of Plastic.

The main parts used in the Vaya Drynk Plastic will be Plastic body, Plastic Lid enclosed by a Pedia safe Lid and Dust Cap. For Vaya Drynk Metal it’s the same Lid used in Drynk plastics but with insulated metal body.

Vaya Drynk is made of best in class materials for consumer food ware.The Vaya Drynk Plasticare made with Tritan for both body and the lid, which is a BPA free Plastic. Tritan is impact-resistant — products can be used without fear of shattering whereas Vaya Drynk Metal uses food grade Stainless Steel 304 for the body which has high corrosion resistance to standard food product usage conditions and the lid remains same as plastic.

a. Plastic Body and Lid: Dish Washer top rack safe or hand wash in warm water (<60⁰C) with mild detergent.

b. O-Ring & Silicone Valve: Hand Wash in warm water (<60⁰C) with mild detergent. Dish Washer not recommended.

c. Dust Cap: Hand wash in normal water (<40⁰C) with mild detergent. Dish washer & Warm water above the range not recommended.

d. Metal Body: Wipe with damp cloth, use warm water and mild detergent if needed.

The Vaya Drynk (Plastic & Metal) is designed to withstand bumps and nicks of everyday usage. Any drops from greater heights will impact the structural integrity of the product.

For a leak-proof and safe experience, always fill the Drynk only up to the fill line.

Pedia Safe Lid design is optimized to cater to refreshing cold drinks or soothing warm drinks for kids. Hence it is not recommended for usage with beverages above 55⁰C. Drinking above the range may burn the mouth. For cold temperature it’s not recommended to fill below 10⁰C as this may lead to brain freeze.

Yes. The materials used in the Vaya Drynk are BPA free and food safe.

Vaya Drynk Plastic: Yes. Even you can put it in the freezer.

Vaya Drynk Metal: No. Storing any vacuum insulated product in the refrigerator might damage the vacuum seal.

Vaya Drynk Plastic: Yes but should be without lid because once gets heated up, the body expands and the vapour pushes the lid out.

Vaya Drynk Metal: No. It is not microwaveable.

There is a layer of insulating foil in the vacuum region for enhanced thermal performance. This might give a mild rattling noise in the metal body.

Unlock the plastic lid from the metal/plastic body and fill the metal/plastic body with the beverage of your choice. Make sure to fill only up to the fill line. Close it with plastic Lid and enclose it with the Pedia Safe Lid with the ribs getting locked with the plastic lid. After that cover it with the dust cap, when the Drynk is not in use.

Note: If there is any mismatch in mating the ribs of plastic lid with Pedia safe lid, you may observe some leaks.

When using the Vaya Drynk Metal/Plastic, do not hold the Drynk by the lid; Always hold the Drynk by the metal/plastic body.

No. When you first receive the product, wash the components thoroughly with warm water and mild dishwashing liquid, before usage.

Vaya Drynk Plastic is intended for use by kids starting from the age limit of 2+ Yrs.

Since the contents of the Vaya Drynk (Metal) will be hot, they can be handled by kids under the supervision of adults. Ensure that the product is kept out of reach of toddlers and infants.

A moderate level of tightening such that the seal is firmly held, and the metal/plastic body and lid gets into contact. Make sure the Drynk is always used with the circular seals secured on the lid.

No. For optimal leak resistance, always place the Drynk (Metal/plastic) standing upright.

You can take your Drynk on an airplane, but security may ask you to inspect its contents before boarding. Restrictions to the type and volume of the contents may also apply.

The Drynk (Metal/Plastic) is not designed to be heated. Doing so will cause permanent damage to the product. Do not heat Drynk on the stove or in a wok, cooking vessel etc.

After cleaning the Drynk (Metal/Plastic), store it open in a dry cool place; to prevent the formation of bacteria, mold or unpleasant odours.

Vaya Carafe is a vacuum-insulated pitcher which is designed with a capacity of 1200 ml.

Vaya Carafe is made with best-in-class materials for consumer drink-ware.

The metallic component is made with food-grade stainless steel 304, which has corrosion resistance across standard food product usage conditions. The plastic components are made with eco-friendly Bio-Copolyester that is known to have high chemical and stain resistance. It is also BPA-free, and FDA certified.

Vaya Carafe keeps beverages hot or cold for up to 48 hours *. The performance of Vaya Carafe significantly depends on the temperature of the beverage that is poured into it. The below graphs show the performance of Vaya Carafe over a 48-hour period.

No. Vaya Carafe is not dishwasher safe.

You can enjoy hot beverages like coffee, tea etc. or cold beverages such as smoothies, cold coffee with equal comfort.

Unlock the lid from the metal body and fill the metal body with the beverage of your choice. Make sure to fill only up to the fill line and then lock the lid on the metal body.

Vaya Carafe is intentionally designed for carrying beverages of a larger volume capacity. You can also carry it using the accessories provided for the same.

The heat retention performance of Vaya Carafe during usage can be optimized by priming the product before use.

• Fill the Carafe with hot water.
• Let it sit for a few minutes
• Empty Carafe and fill it with the hot beverage you wish to carry.
• For cold beverages follow the above instructions with cold water instead of hot water.

Always rinse the metal body after use and rinse the lids under running water. Any mild dishwashing liquid can be used to clean the product. The external surface of the metal body must be washed only with a soft sponge, since usage of abrasive cleaning pads/scrubbers or steel-scrubs can damage the exterior paint finish.

The inner surface on the metal body can be cleaned with a scrubber. Do not use steel scrubs as it can leave small steel pieces and contaminate the Carafe’s stainless steel surface.

Also, Vaya recommends the use of bottle bright especially made for drinkware. Ensure the unit is completely dried after washing.

Vaya Carafe is designed to withstand bumps and nicks that occur due to everyday usage. Any drops from greater heights will impact the structural integrity of the product.

For leak-resistance and a safe experience, always fill Vaya Carafe only up to the fill line.

Yes. The materials used in Vaya Carafe are BPA-free and food safe.

No. Storing Vaya Carafe in the refrigerator might damage the vacuum seal.

No. Vaya Carafe is not microwaveable.

No. When you first receive the product, wash the components thoroughly with warm water and mild dishwashing liquid before usage.

Since the contents of Vaya Carafe will be hot, they can be handled by pre-teens and adolescents provided they are careful. Vaya Carafe is not intended for use by toddlers and infants. Ensure that the product is kept out of the reach of toddlers and infants.

A moderate level of tightening such that the seal is firmly held between the metal body and lid is adequate. Do not over tighten the lids. Make sure that Vaya Carafe is always used with the circular seals secured on the lids.

No. For optimal leak resistance, always place Vaya Carafe standing upright.

You can take your Vaya Carafe on an airplane, but security may ask you to inspect its contents before boarding. Restrictions to the type and volume of the contents may also apply.

Vaya Carafe is not designed to be heated. Doing so will cause permanent damage to the product. Do not heat Vaya Carafe on the stove or in a wok, cooking vessel etc.

After cleaning Vaya Carafe (please refer earlier FAQ), store it open in a dry, cool place; to prevent unpleasant odours or the formation of bacteria and mold.

For easy pouring, no need to remove the lid completely. Gently rotate the lid for one complete rotation for lesser flow and two complete rotations for more flow based on the user convenience.